|
Corvette aFe Black Series Carbon Fiber Cold Air Intake System w/Pro DRY S Filters : C8 Stingray, Z51 LT2
Features
- Dyno-tuned lightweight 100% carbon fiber tube
- Dual 360-degree radial flow dry (oil-Free) air filters
- Heat resistant housing that enclosed the dual air filter set up
- Carbon Fiber cover for an aggressive look
- Custom aFe POWER laser etched stainless steel washers and bolts
- Premium silicone couplings and hardware
Large Three Layer Performance Air Filters:
Dual 4†Flange 360-degree radial flow air filters feature our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Their inverted tops make for more filter surface area, resulting in longer service intervals. Pro DRY S filters are easily recharged with aFe's POWER CLEANER. See Part number 31109007
Carbon Fiber Intake Tube:
Lightweight twill weave carbon fiber tube directs the filtered air from the dual air filters to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of 100% carbon fiber material (No fiberglass).
Heat-Resistant Housing:
The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation.
Carbon Fiber Cover:
This unique carbon fiber cover is also lightweight high gloss clear-coated twill weave carbon fiber and closes off the housing from unwanted hot engine air. It features a Black Series emblem for authenticity and is secured to the housing using aFe POWER laser etched washers and bolts. This cover will greatly enhance your engine bay appearance.
Premium Hardware:
Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.
Emission Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
|
