Manufacturers
Payments Accepted
BOX_INFORMATION_CARD
BOX_INFORMATION_CARD
Secure Payment
Process Credit Cards


This Website is 100% secured!
Transactions on this site are protected with up to 256-bit Secure Sockets Layer (SSL) encryption.
Trade Associations

C6 Performance is a Proud Member of SEMAProud Member of The National Corvette Museum

Eventuri C8 Corvette Carbon Fiber Intake System with Clear Cover  Product 19 of 20 in category C8 Corvette Air Intakes  AFE Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filters Chevrolet Corvette (C8) 20-24 V8-6.2L

AFE Magnum FORCE Stage-2 Cold Air Intake System w/Pro 5R Filters Chevrolet Corvette (C8) 20-24 V8-6.2L

AFE Magnum FORCE Stage-2 Cold Air Intake System w/Pro 5R Filters Chevrolet Corvette (C8) 20-24 V8-6.2L
MSRP: $717.50
Our Price: $487.90
Savings: $229.60 (32%)
Qty:

Add to Wish List

Large Five Layer Performance Air Filters:
Dual 4" Flange 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, and in most cases deliver the highest power gains of our filter media options. This media is perfect for street and/or track use. Their inverted tops make for more filter surface area, resulting in longer service intervals.

Heat-Resistant Housing:
The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation. All the factory harness and mounts are transferred to the back of the aFe POWER housing for a factory-like installation. The radio antenna plastic melded on the factory air box is also transferred to the aFe POWER housing. The removal of the antenna from the factory air box requires two plastic melted mounting tabs to be cut off.

Dyno-Tuned Intake Tube:
This system features a high-quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable.

Seals to the Trunk Cover:
The seal trim installed on the housing edge seals to the plastic trunk cover to protect the air filters from unwanted warm engine air. This setup allows for more aggressive air intake noise while not sacrificing any performance.

Premium Hardware:
Premium stainless-steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.

View Install Instructions

Features:

  • Dyno-Proven Gains up to +12 HP and +10 Lbs. x Ft. TQ
  • Outflows Factory Intake by 15%
  • Measured Flow: 605 CFM @ 7" H20
  • Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
  • Dual 360-degree radial flow performance air filters
  • Heat resistant housing that enclosed the dual air filter set up
  • Housing seals to the trunk cover to protect air filters from unwanted engine heat
  • Premium silicone couplings and hardware
Specifications:
  • Air Filter Flange Inside Diameter: 4
  • Air Flow Gain: 15
  • Air Flow Rate: 605
  • Air Intake Tube Color: Black
  • Air Intake Tube Material: Cross-linked Polyethylene
  • Coupler Color: Black
  • Coupler Included: Yes
  • Coupler Material: Silicone
  • Filter Color: Blue
  • Filter Included: Yes
  • Filter Material: Cotton Gauze
  • Horse Power Increase: 12
  • Housing Color: Black
  • Housing Material: Cross-linked Polyethylene
  • Modifications Required: No
  • Mounting Hardware Included: Yes
  • Oiled or Dry Media: Oiled
  • System Type: Open Element Intake
  • Torque Increase: 10
  • Tuning Required: No
Notes:
  • While this intake fits on the convertible models, the seal trim of the housing will not seal to the trunk cover. 58-10007R and 58-10007D are preferred for convertible models because the cover in those kits will properly seal the housing.
  • This item is not CARB exempt and is not legal to purchase in California
Fitment:
  • Chevrolet Corvette V8 6.2L Gas 2020-2024

This product was added to our catalog on Friday 03 November, 2023.
Points & Rewards Information
Points Credit : 488 points Currently valued at $14.64
Write a Review and earn $1.5 worth of points.
Please check the Reward Point Program FAQ for more information.
Eventuri C8 Corvette Carbon Fiber Intake System with Clear Cover  Product 19 of 20 in category C8 Corvette Air Intakes  AFE Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filters Chevrolet Corvette (C8) 20-24 V8-6.2L
Manufacturers
Payments Accepted
BOX_INFORMATION_CARD
BOX_INFORMATION_CARD
Secure Payment
Process Credit Cards


This Website is 100% secured!
Transactions on this site are protected with up to 256-bit Secure Sockets Layer (SSL) encryption.
Trade Associations

C6 Performance is a Proud Member of SEMAProud Member of The National Corvette Museum

  • Shopping Cart
  • 0 items
My Account Info
Live Support
Advanced Search

Use keywords to find the product you are looking for.
Social Networking


Check us out on Facebook!

Follow us on Twitter!
See our Videos on YouTube!

Check out our eBay Store!

Win with C6 Performance, the Best place for quality C8, C7, C6, C5 Grand Sport, ZR1 and Z06 Corvette and Camaro Parts
WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov
All Content COPYRIGHT 2000-2024 C8 Motorsports LLC and Loaded Commerce. All Rights Reserved.