C6 Corvette Chrome Alternator Cover

This hand formed 16 ga. steel "show quality" triple chrome plated piece transforms your drab alternator into a chrome plated work of art. Simple installation requires no modifications to your Corvette. Alternator covers are supported by welded brackets and / or velcro that easily attach to existing hardware. Folks, these are the finest chrome accessories you will find! Installation time is about 10 minutes. Fits 2005-2013 incl. Z06 & Gran Sport

INSTALLATION INSTRUCTIONS
DISCONECT BATTERY BEFORE BEGINNING 1.Loosen top alternator mounting bolt far enough for the slotted bracket on the Chrome Alternator Cover to slide between the alternator and bolt head.
2.Place the Chrome Alternator Cover in position over the alternator with the bracket in the correct position on the bolt, lower the Chrome Cover until it touches the alternator.
3. Mark the location where it touches on both the alternator and the Chrome Cover.
4. Remove the Chrome Cover and secure the supplied Velcro to both the alternator and the Chrome Cover at these locations. (Make sure this location is clean of any greese or dirt so the Velcro adhesive will stick properly)
5. Replace the Chrome Cover on the alternator with the bracket firmly against the bolt and lower the Cover down and firmly press on it in the area of the Velcro to make sure the two pieces attach.
6. Tighten alternator bolt.