PAC SWI-RC-1 C6 Corvette Steering Wheel Radio Control Interface

PAC SWI-RC-1 C6 Corvette Steering Wheel Radio Control Interface

Steering Wheel Control Interface for Alpine, JVC, Clarion, Kenwood, Pioneer, Sony, Valor, OEM, Boyo, Dual, Visteon, Advent & Blaupunkt Radios

Steering Wheel Radio Control Interface; For Retaining The Use Of Steering Wheel Radio Controls When Replacing A Factory Radio With An Aftermarket Radio/ Retains Programming Even If Vehicle Battery Is Disconnected;

Compatibility Notes

    The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont etc.). If the radio does not have a wired remote input then you will need to use the SWI-X.
    Clarion model CZ500 does not support remote Bluetooth controls
    JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls
    Pioneer AVIC-Fxxx radios do not interpret radio preset seeking commands. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer.
    Pioneer radios with Bluetooth feature, the steering wheel controls will not adjust the phone call volume.  The phone call volume must be adjusted on the face of the radio.  This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer.
    Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH and the AVIC-X920BT, X930BT, X940BT will support the Voice Recognition function via wired remote input.

See www.pac-audio.com For Compatibility Notes And Specific Radio Fitment Data