2019-2024 Camaro Radar Detector Harness All (RJ11) except Uniden- No extra leads

This harness is for installing your radar detector into your 2019-2024 Camaro.  This harness saves you from splicing and/or entering pins into your overhead console harness. 

This harness is for all radar detectors that use a phone cord style connector (RJ11).  If you have a Uniden model radar detector please select Uniden model from the drop down menu.

Harness also available with a separate power and ground wire for those that may want to add in a dash cam or such.  Please note that these loose leads are an ignition based 12 volt feed and ground.  Most dash cams and such require 5 volts and you will need to make sure and use a voltage converter if needed.  This is not included with this harness.

This works on all 2019-2024 models.

Uniden models have been updated as of 08/21/19 to correct the intermittent check engine light issue that some customers were having.  If you have purchased this harness prior to 08/21/19 and are experiencing a check engine light, after installing our harness, please reach out to us on exchanging it out.

Please enter your VIN # and we will confirm fitment before shipment.

Product Overview: 

Install Guide: