Corvette C6 ZR1 Style Front Fender, RH for Base model cars with Stock Bumper
This Fenders can be installed on a base C6 Corvette.
Give your Corvette C6 ZR1 look The item is the right hand Front Fender.
The item is the the right hand Front Fender only you will need the Rear Quater and the other componets to finish the look.
Note: Upgraded models: Base model
Base model: Base C6, You will NOT need to replace the front bumper with a Z06 front bumper and you need to upgraded some of the front hardware. Complete hardware is available, please contact us for full details.
This is a special order item. It cannot returned or refunded.
Oversized item must be shipped by Truck Freight we need to get a shipping quote for it
- Fits original base car to give a ZR1 look
- Can be used with stock front bumper, or upgrade to a ZR1 look bumper
- Sexy and Sleek
- Precision Fit - Heavily Reinforced Molds Adapted From Original GM Panels & Cured 24 Hours
- Unequalled Finish - Finest Resins, 3 Layers Of 3.5 Oz Mat, 21 Mils Soft Sanding Gel Coat
- Premium Quality - Our Hand Rolled Process Is Stronger & Free Of Bubbles & Waves
- Superior Strength - Proper Reinforcements Provide Long Term Durability
- Made In The USA
- Passenger Side
At first glance, all aftermarket Corvette fiberglass body panels may look the same. During the 1980's and 1990's, several aftermarket companies tried reproducing replacement body panels for America's favorite sports car. However, many short cuts were taken to save costs. The end result were body panels full of air bubbles and waves. The amount of prep work required was time consuming and frustrating for body shops and expensive for consumers. Even worse, these fiberglass body panels didn't have reinforcements so long term durability was compromised. That may be fine for a race car but definitely not OK for a driver, show car, or investment. Those were the 1980's and 1990's and definitely NEVER the case at Eckler's Corvette.
Body shops and do-it-yourself enthusiasts have trusted Eckler's Corvette as their #1 fiberglass source since 1965. They've tried other brands that just don't measure up to Eckler's Corvette in quality, durability, fit, and finish. Eckler's Corvette has invested heavily in research and development, manufacturing processes, and quality control techniques. The result is the finest quality fiberglass body panels that fit right the first time and with minimal prep work required. Eckler's Corvette fiberglass body panels are painstakingly reproduced from the original GM body panels. Eckler's Corvette overbuilds every fiberglass mold with heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Eckler's Corvette utilizes only the best automotive grade resins with 3 layers of 3.5 ounces of mat and 21 mils of soft sanding gel coat. Eckler's superior hand-rolled fiberglass process eliminates troublesome bubbles and frustrating waves. Eckler's body panels are precision trimmed and drilled to eliminate fitment issues. All of this eliminates hassles, frustrations, and disap |