Product Description
LOWERS 1 INCH ON ALL C8 CORVETTE ZR1's (Excluding ZR1X) The lowering spring kit offers
1 inch of lowering front and rear. Combine that with the factory adjust-ability of .75 inch lowering you can achieve a
total lowering of 1.75-2 inches. The spring is also 30% stiffer than factory giving increased handling without sacrificing low speed ride comfort. Cars that have front lift can use these springs and our lowering collars up front to achieve the same drop.
These have been specifically engineered to work with the factory shocks. Using 3D scanning technology, the entire suspension was scanned, measured, and studied. This resulted in a spring that works with the factory shocks to maintain correct geometries while lowering the vehicle and increasing handling. Anything beyond what these springs offer would require an entire new set up, much like aftermarket coilovers.
- Fits all C8 Corvette ZR1 With or without ZTK
- Smooth ride
- Mag Ride functions like factory
- Front Lift functions like factory
- 1 Inch of lowering
- MagRide socket and De-Pin tool included at no extra charge!
- 30% stiffness increase over Non ZTK Springs
- 11% Stiffness increase over ZTK Springs
- Powder Coated Blue
- Fatigue tested 140,000 jounce to rebound cycles with no issues
- ZR1 can achieve a 1.5 inch drop if they choose via OEM lowering spring perch or by using our lowering collars for front lift cars
- Made in USA
- Lifetime Warranty
- Works with Paragon Z06 / ZR1 Front Lift Collars
