RacingBrake C8 Corvette 400/390mm Front and Rear Big Brake Kit

Brake line installation note:

1. We make the femal fitting (to the rigid line) swivel (unlike OE which is fixed) but not the banjo, so you should install the banjo to the caliper first; then secure the femal fitting to the rigid line to complete the installation.

2. The brackets were transferred from OE and because the custom stainless braided lines are smaller in diameter so they are loose, but can be secured to the line by wrapping the duct tape (included) onto the line then slide the brackets to make a tighter fit. You will find this is easier to install than OE which all the brackets are fixed (non moveable) to the line.