C8 Corvette 2020 Special Tool, Alignment Adapter Mount Pins

Application: 2020 Chevrolet Corvette

CH-47960-10 Digital Angle Gauge Adapter is a flat, machined tool with two holes and one adjustable peg. It is used in conjunction with a digital angle gauge or the current CH-47960 Caster Angle Gauge to measure the rear caster on the vehicle. CH-47960-10 currently has pegs that are too long and too small OD to fit into the gauge holes of the rear knuckle. CH-47960-15 is a set of two pins that will be used in place of the current pins on the plate of CH-47960-10, allowing it to be mounted onto the rear knuckle and provide a mounting surface for the caster angle gauge.

CH-47960 has a remote display to allow the angle to be read during alignment reading and service. Both CH-47960-10 and CH-47960-15 are used with CH-47960 Caster Angle Gauge, initially used for the Saturn Sky and Pontiac Solstice. CH-47960-10 is currently at Corvette dealers, and using CH-47960-15 allows the rear caster to be measured on the new Corvette.