26.5 lb/hr Disc High-Z Fuel Injector, Corvette 5.7L LT4 VIN5 1996, Camaro
TYPICAL APPLICATIONS:
- Chevrolet Corvette 5.7L LT4 VIN5 (1996)
- Chevrolet SLP Camaro 5.7L LT4 VIN5 (1997)
- Pontiac SLP Firebird 5.7L LT4 VIN5 (1997)
Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:
- The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
- Compatible with alternative fuels (i.e. E85, Methanol)
- Longer service life
- High-speed disc action allows wider dynamic flow range for improved idling
- Quieter operation
- Revolutionary disc design resists build up deposits which can affect fuel flow.
- No Fuel leakage for quicker starts
- Grease supplied to lubricate o-rings prior to installation
Interchange Part Numbers:
- 17091654
- 17121909
- 17124251
- 17124289
- 217314
TECHNICAL INFORMATION Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above. This high-impedance injector will work with all factory ECM/PCM injector drivers. |