Nitrous Outlet The Quick Fix EFI Single Nozzle System - Gas/E85 (5-55psi)(35-200

• Easily Add Nitrous to Any EFI Vehicle
• Single Nozzle System with 5lb Bottle
• Duffel Bag and Mounting Plate Included
• Push Button Activation
• .078" Nitrous and .155" Fuel Solenoids
• Nitrous Jets for 35-200hp
• Fuel Jets for Gasoline and 45-55psi

Get Your Fix:
The Quick Fix nitrous kit isn't the first of its kind, but it is the best!  It allows you to easily add up to 200hp to just about any EFI vehicle.  Plus, we wanted to keep it stealthy by concealing the bottle in the included duffel bag.  Activation is super simple to with our pre-wired harness and high-amp push button.  You literally only need to make two connections at the battery and plug in the solenoids - thats it!

Premium Components:
This nitrous kit utilizes a single aluminum 1-1/16" 90° wet nozzle and a pair of US made solenoids with 3an hoses.  The nitrous solenoid features a .078" orifice, and the fuel solenoid features a .155" orifice. Solenoids are attached to a custom universal laser cut bracket that is black powdercoated.  Nitrous jets are included to allow you to spray 35, 50, 75, 100, 150, and 200hp!  The fuel jets included are for gasoline only and are for 45-55psi fuel systems. A 5lb bottle comes pre-attached to a laser cut 5052 Aluminum plate in a high-quality duffel bag for the ultimate stealthy appearance.  A 120" 4an main feed line supplies the solenoid.  We even go so far as to include a pre-terminated harness with alligator clips for the battery connection and a Deutsch connector at the solenoids.  All you have to do is find a spot in the firewall to pass the harness through.  The push button and cord are already wired in to the harness as well.  

Fuel Supply and Tuning:
We supply two universal-type fuel adapters that work with a good number of vehicles.  However, check out our full line of fuel adapters for a direct fit solution for your vehicle if you desire.  Even though this nitrous kit is designed for a quick install, the basics of nitrous still apply.  Remove 2° of timing for every 50hp increase and a 2-step colder (non-projected tip) spark plug will be needed for increases of 100hp or more.